Setting Up
MG8/2FX
21
Mounting to a Microphone Stand
•
When using the mixer on a microphone stand, be
sure to set the stand on a level and stable surface.
Do not set up the stand in locations subject to
vibrations or wind.
•
Note that mixer may be damaged if the stand
should fall over. Attach the connection cables
carefully so that the cables will not catch on the
equipment and cause it to fall. For example:
arrange the cables so that they run parallel with
the microphone pole down to the base of the
stand.
•
Leave ample free space around the stand.
Turn the mixer upside-down, and hold the micro-
phone-stand adaptor (BMS-10A; sold separately)
against the bottom of the mixer so that the screw holes
are aligned (
1
).
Screw the adaptor firmly into place with the two
screws (
2
).
Turn the mixer right-side up, and mount it onto your
microphone stand.
Loosen the angle adjustment wingnut (
1
), adjust the
mixer’s angle as desired (
2
), and then tighten the
wingnut securely (
3
).
For more information, refer to the BMS-10A Owner’s Man-
ual.
1
1
2
2
3
1
3
2
