Yamaha 2A, Owner'S Manual

Page: 67 / 111

E
4-4
102015
102013
1
2
1
Vertical position
2
Horizontal position
When transporting or storing the out-
board motor while removed from a boat,
fold the tiller handle and lean the motor
on the tiller handle to keep in a horizon-
tal position.
NOTE:
Place a towel or the like under the out-
board motor to protect it from damage.
c C
Keep the power unit higher than the
propeller at all times.
Otherwise, cooling water can run into
the cylinder, which could result in dam-
age.
EMU00328
STORING OUTBOARD MOTOR
When storing your Yamaha outboard for
prolonged periods of time, (2 months or
longer), several important procedures
must be performed to prevent expensive
damage. This is especially important for
your Precision Blend equipped outboard
due to the lean oil ratios used at idle prior
to shutting the engine off for the season.
It is advisable to have your outboard ser-
viced by an authorized Yamaha dealer
prior to storage. However, the following
procedures can be performed by you, the
owner, with a minimum of tools.
6A1-9-1L 4 4/20/01 11:58 AM Page 5