11. MAKE SURE the seals and sealing surface are clean and Fully lubricated with the supplied grease EVERYTIME (you can also buy this at your local
hardware store) before replacing the Inner Nose Cone. (see Fig. 20 and 21)
12. Align the arrow marking and close the inner nose cone by pushing all the way down. (see Fig. 22)
13. MAKE SURE the seals and sealing surface are clean and lubricated before replacing the vent Plug and CLOSE THE VENT PLUG TIGHTLY.
MAKE SURE the plastic link of the vent plug is not jammed in between the vent plug and the o-ring when tighten the vent plug.
14. Close the outer nose cone and the three latches.
Seals
Sealing Surface
17
18
19
20
21
22
Silicone
Grease
Silicone
Grease
• Use appropriate equipment such as wetsuit, BCD, fins, mask & snorkel, surface signaling devise, regulator(s) approved life jacket etc. when using
Seascooter.
• The Seascooter shall not be used in reverse direction.
• Only operate the Seascooter in water.
• Adequate lighting shall be used when using the Seascooter in dark waters and during night diving.
9
