background image

EJU42011

For yo

u

b

est o

w

nership experience, think 

Genuine Yamaha!

Genuine Yamaha  Parts

 – Gen

u

ine Yamaha replacement parts are the exact same

parts as the ones originally e

qu

ipped on yo

u

v

ehicle, pro

v

iding yo

u

 

w

ith the 

performance and d

u

ra

b

ility yo

u

 ha

v

e come to expect. Why settle for aftermarket parts

that may not pro

v

ide f

u

ll confidence and satisfaction?

Genuine Yamaha  Accessories

 – Yamaha only offers accessories that meet o

u

high standards for 

qu

ality and performance. B

u

w

ith confidence, kno

w

ing yo

u

Gen

u

ine Yamaha Accessories 

w

ill fit right and perform right – right o

u

t of the 

b

ox.

Yamalube

 – Take care of yo

u

r Yamaha 

w

ith legendary Yamal

ub

e oils, l

ub

ricants, 

and care prod

u

cts. They’re form

u

lated and appro

v

ed 

b

y the to

u

ghest j

u

dges 

w

kno

w

: the Yamaha engineering teams that kno

w

 yo

u

r Yamaha from the inside o

u

t.

Genuine Yamaha Service Manuals

 – Get the same factory man

u

al for yo

u

v

ehicle

that the technicians at yo

u

r a

u

thorized Yamaha dealer 

u

se. Ser

v

ice man

u

als are 

a

v

aila

b

le thro

u

gh yo

u

r Yamaha dealer or yo

u

 can order them directly thro

u

gh 

yamahap

ub

s.com.

Gen

u

ine Yamaha prod

u

cts are a

v

aila

b

le only from yo

u

r Yamaha dealer.

Find o

u

t more at yamaha-motor.com

UF3P12E0.book  Page 1  Monday, July 23, 2018  9:51 AM

Summary of Contents for 2019 WaveRunner GP1800R





















































































































Reviews: