Yamaha 2016 Grizzly yf700gg, Service Manual, Page: 108 / 474

PERIODIC MAINTENANCE
3-25
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
7. Install:
• Engine oil drain bolt
(along with the gasket )
8. Fill:
• Crankcase
(with the specified amount of the recom-
mended engine oil)
9. Install:
• Dipstick
10.Start the engine, warm it up for several min-
utes, and then turn it off.
11.Check:
• Engine
(for engine oil leaks)
12.Check:
• Engine oil level
Refer to “CHECKING THE ENGINE OIL
LEVEL” on page 3-23.
13.Install:
• Dipstick accessing cover
Refer to “GENERAL CHASSIS (4)” on page
4-11.
14.Check:
• Engine oil pressure
Refer to “MEASURING THE ENGINE OIL
PRESSURE” on page 3-25.
EBS30458
MEASURING THE ENGINE OIL PRESSURE
1. Check:
• Engine oil level
Refer to “CHANGING THE ENGINE OIL” on
page 3-24.
2. Remove:
• Side panel (left)
Refer to “GENERAL CHASSIS (1)” on page
4-1.
• Footrest board (left)
Refer to “GENERAL CHASSIS (4)” on page
4-11.
3. Start the engine, warm it up for several min-
utes, and then turn it off.
NOTICE
ECB02550
When the engine is cold, the engine oil will
have a higher viscosity, causing the engine
oil pressure to increase. Therefore, be sure
to measure the engine oil pressure after
warming up the engine.
4. Remove:
• Main gallery bolt “1”
WARNING
EWB03630
The engine, muffler and engine oil are ex-
tremely hot.
5. Install:
• Oil pressure gauge “1”
• Adapter “2”
T
R
.
.
Oil filter cartridge
15 Nm (1.5 m·kgf, 11 ft·lbf)
T
R
.
.
Engine oil drain bolt
22 Nm (2.2 m·kgf, 16 ft·lbf)
Engine oil quantity
Quantity (disassembled)
2.60 L (2.75 US qt, 2.29 Imp.qt)
Without oil filter cartridge re-
placement
2.00 L (2.11 US qt, 1.76 Imp.qt)
With oil filter cartridge replace-
ment
2.10 L (2.22 US qt, 1.85 Imp.qt)
New
Pressure gauge
90890-03153
Pressure gauge
YU-03153
Oil pressure adapter H
90890-03139
1
1
2