manualshive.com logo in svg

Yamaha 2011 WaveRunner FZS, Owner'S/Operator'S Manual, Page: 7 / 104

Share
Download
Yamaha 2011 WaveRunner FZS Owner'S/Operator'S Manual Download Page 7

General and important labels

2

EJU42060

Emission control information 

This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines applicable at the time of man-
ufacture.

EJU42070

Approval label of emission control 
certificate 

This label is attached to the top of the cylinder
head. (See page 40 for seat removal and in-
stallation procedures and page 82 for engine
cover removal and installation procedures.)

For Canada only

This label is attached to the inside of the en-
gine compartment. (See page 40 for seat re-
moval and installation procedures and page

45 for information on the watertight storage
compartment.)

EJU40490

Manufactured date label 

This label is attached to the top of the cylinder
head. (See page 40 for seat removal and in-

1

Emission control information label location

1

1

Emission control information label location

1

EMISSION CONTROL INFORMATION

ENGINE  FAMILY:

THIS ENGINE CONFORMS TO          CALIFORNIA AND U.S. EPA EXHAUST REGULATIONS
FOR SI MARINE ENGINES. REFER TO THE OWNER’S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS. THIS VESSEL MEETS U.S. EPA EVAP STANDARDS.

FELS (HC+NOx/CO) :                 g/kW-hr
TROLLING SPEED :                  rpm
FUEL : UNLEADED REGULAR GASOLINE
CERTIFIED COMPONENTS : 

YAMAHA MOTOR CO., LTD.

MAX POWER :                          kW
SPARK PLUG :
VALVE LASH (mm)  IN :                   EX :

DISPLACEMENT :               Liters
SPARK PLUG GAP (mm) :

UF2R51E0.book  Page 2  Wednesday, June 22, 2011  1:38 PM

Summary of Contents for 2011 WaveRunner FZS









































































































Reviews:

No comments