manualshive.com logo in svg

Yamaha 2011 V Star XVS650AA, Owner'S Manual

Share
Download
Yamaha 2011 V Star XVS650AA Owner'S Manual Download Page 55

PERIODIC MAINTENANCE AND ADJUSTMENT

7-13

7

10. Start the engine, and then let it idle

for several minutes while checking
it for oil leakage. If oil is leaking, im-
mediately turn the engine off and
check for the cause.

11. Turn the engine off, and then

check the oil level and correct it if
necessary.

EAU20026

Final gear oil 

The final gear case must be checked
for oil leakage before each ride. If any
leakage is found, have a Yamaha deal-
er check and repair the vehicle. In addi-
tion, the final gear oil level must be
checked and the oil changed as follows
at the intervals specified in the periodic
maintenance and lubrication chart.

WARNING

EWA10370

●

Make sure that no foreign mate-
rial enters the final gear case.

●

Make sure that no oil gets on the
tire or wheel.

To check the final gear oil level

1. Place the vehicle on a level sur-

face and hold it in an upright posi-
tion.

TIP

Make sure that the vehicle is positioned
straight up when checking the oil level.
A slight tilt to the side can result in a
false reading.

2. Remove the final gear oil filler bolt

and its gasket, and then check the
oil level in the final gear case.

TIP

The oil level should be at the brim of the
filler hole.

3. If the oil is below the brim of the fill-

er hole, add sufficient oil of the rec-
ommended type to raise it to the
correct level.

4. Check the gasket for damage, and

replace it if necessary.

5. Install the final gear oil filler bolt

and its gasket, and then tighten the
bolt to the specified torque.

1. Final gear oil filler bolt

2. Gasket
3. Correct oil level

3

2

1

U1BF21E0.book  Page 13  Tuesday, April 20, 2010  11:41 AM

Summary of Contents for 2011 V Star XVS650AA































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands