Yamaha 2011 V Star XVS650A Owner'S Manual Download

Page: 75 / 94

PERIODIC MAINTENANCE AND ADJUSTMENT

7-33

EAU24283

Replacing a turn signal light
bulb or the tail/brake light bulb

1. Remove the lens by removing the

screws.

XVS650A

XVS650AA

2. Remove the burnt-out bulb by

pushing it in and turning it counter-
clockwise.

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the lens by installing the

screws.

NOTICE:

Do not over-

tighten the screws, otherwise
the lens may break.

[ECA10681]

EAU33413

Replacing the auxiliary light
bulb (XVS650AA)

If the auxiliary light bulb burns out, re-
place it as follows.

1. Remove the headlight unit by re-

moving the screws.

2. Remove the socket (together with

the bulb) by pushing it in and turn-
ing it counterclockwise.

1. Screw

U1BF21E0.book Page 33 Tuesday, April 20, 2010 11:41 AM

Summary of Contents for 2011 V Star XVS650A































































































Search results

Summary of Contents for 2011 V Star XVS650A

Reviews:

Related manuals for 2011 V Star XVS650A

Brands by name

Popular brands

Yamaha 2011 V Star XVS650A, Owner'S Manual

Search results

Summary of Contents for 2011 V Star XVS650A

Reviews:

Related manuals for 2011 V Star XVS650A

Brands by name

Popular brands