Yamaha 2011 MT-01 Owner'S Manual Download

Page: 88 / 96

SPECIFICATIONS

9-1

Dimensions:

Overall length:

2185 mm (86.0 in)

Overall width:

800 mm (31.5 in)

Overall height:

1105 mm (43.5 in)

Seat height:

825 mm (32.5 in)

Wheelbase:

1525 mm (60.0 in)

Ground clearance:

145 mm (5.71 in)

Minimum turning radius:

3200 mm (126.0 in)

Weight:

Curb weight:

265 kg (584 lb)

Engine:

Engine type:

Air cooled 4-stroke, OHV

Cylinder arrangement:

V-type 2-cylinder

Displacement:

1670 cm³

Bore

stroke:

97.0

113.0 mm (3.82

4.45 in)

Compression ratio:

8.40 : 1

Starting system:

Electric starter

Lubrication system:

Dry sump

Engine oil:

Recommended brand:

YAMALUBE

Type:

SAE 10W-30, 10W-40, 10W-50, 15W-40,
20W-40 or 20W-50

Recommended engine oil grade:

API service SG type or higher, JASO
standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

3.70 L (3.91 US qt, 3.26 Imp.qt)

With oil filter cartridge replacement:

4.10 L (4.33 US qt, 3.61 Imp.qt)

Air filter:

Air filter element:

Oil-coated paper element

Fuel:

Recommended fuel:

Unleaded gasoline only

Fuel tank capacity:

15.0 L (3.96 US gal, 3.30 Imp.gal)

Fuel reserve amount:

3.0 L (0.79 US gal, 0.66 Imp.gal)

Fuel injection:

Throttle body:

ID mark:

5YU1 02

Spark plug(s):

Manufacturer/model:

NGK/DPR7EA-9

Manufacturer/model:

DENSO/X22EPR-U9

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

Clutch:

Clutch type:

Wet, multiple-disc

Transmission:

Primary reduction ratio:

1.479 (71/48)

Final drive:

Chain

Secondary reduction ratio:

2.294 (39/17)

Transmission type:

Constant mesh 5-speed

Operation:

Left foot operation

Gear ratio:

1st:

2.375 (38/16)

2nd:

1.579 (30/19)

3rd:

1.160 (29/25)

–20 –10 0

10 20 30 40 50 ˚C

10 30 50 70 90 110

130 ˚F

SAE 10W-30

SAE 15W-40

SAE 20W-40

SAE 20W-50

SAE 10W-40

SAE 10W-50

U5YU27E0.book Page 1 Wednesday, December 15, 2010 1:28 PM

Summary of Contents for 2011 MT-01

































































































Search results

Summary of Contents for 2011 MT-01

Reviews:

Related manuals for 2011 MT-01

Brands by name

Popular brands

Yamaha 2011 MT-01, Owner'S Manual

Search results

Summary of Contents for 2011 MT-01

Reviews:

Related manuals for 2011 MT-01

Brands by name

Popular brands