Yamaha 2010 YZF-R125Y Owner'S Manual Download | Manualshive

Page: 54 / 88

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-19

7

WARNING

EWA10600

This motorcycle is fitted with super-
high-speed tires. Note the following
points in order to make the most ef-
ficient use of these tires.

●

Use only the specified replace-
ment tires. Other tires may run
the danger of bursting at super
high speeds.

●

Brand-new tires can have a rela-
tively poor grip on certain road
surfaces until they have been
“broken in”. Therefore, it is ad-
visable before doing any high-
speed riding to ride conserva-
tively for approximately 100 km
(60 mi) after installing a new tire.

●

The tires must be warmed up
before a high-speed run.

●

Always adjust the tire air pres-
sure according to the operating
conditions.

EAU21960

Cast wheels

To maximize the performance, durabil-
ity, and safe operation of your vehicle,
note the following points regarding the
specified wheels.

●

The wheel rims should be checked
for cracks, bends or warpage be-
fore each ride. If any damage is
found, have a Yamaha dealer re-
place the wheel. Do not attempt
even the smallest repair to the
wheel. A deformed or cracked
wheel must be replaced.

●

The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.

●

Ride at moderate speeds after
changing a tire since the tire sur-
face must first be “broken in” for it
to develop its optimal characteris-
tics.

Front tire:

Size:

100/80-17 M/C 52H

Manufacturer/model:

PIRELLI/SPORT DEMON
MICHELIN/PILOT SPORTY

Tire air valve:

TR412

Valve core:

V3002 (original)

Rear tire:

Size:

130/70-17 M/C 62H

Manufacturer/model:

PIRELLI/SPORT DEMON
MICHELIN/PILOT SPORTY

Tire air valve:

TR412

Valve core:

V3002 (original)

U5D720E0.book Page 19 Thursday, March 26, 2009 11:29 AM

«
...
52
53
54
55
56
...
»

Summary of Contents for 2010 YZF-R125Y

























































































Reviews:

No comments

Related manuals for 2010 YZF-R125Y

Brand: National Cycle Pages: 5

Brand: N-Com Pages: 32

KAWASAKI ZX6R 2007/8

Brand: Evotech Performance Pages: 2

Brand: Yamaha Pages: 98

Star XVS13CB(C)

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 145

ROADLINER XV19SW

Brand: Yamaha Pages: 444

Brand: Yamaha Pages: 494

Brand: Yamaha Pages: 94

STAR XV19CSX(C)

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 100

Star XV250B 2011

Brand: Yamaha Pages: 98

Brand: Öhlins Pages: 2

Brand: TVS Pages: 48

Brand: DYNATEK Pages: 11

2007 PAMPERA 450

Brand: GAS GAS Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands