Yamaha 2010 V Star XVS650AZ Owner'S Manual Download | Manualshive

Page: 62 / 92

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-21

7

3. Tighten the locknut.

WARNING

EWA11230

After adjusting the brake pedal posi-
tion, the brake pedal free play must
be adjusted.

Brake pedal free play

The brake pedal free play should mea-
sure 20.0–30.0 mm (0.79–1.18 in) at
the brake pedal end. Periodically check
the brake pedal free play and, if neces-
sary, adjust it as follows.

To increase the brake pedal free play,
turn the adjusting nut at the brake rod in
direction (a). To decrease the brake
pedal free play, turn the adjusting nut in
direction (b).

EAU22272

Adjusting the rear brake light
switch

The rear brake light, which is activated
by the brake pedal, should come on just
before braking takes effect. If neces-
sary, adjust the rear brake light switch
as follows.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).

1. Locknut
2. Brake pedal position adjusting bolt

1. Brake pedal free play adjusting nut

1. Rear brake light switch

2. Rear brake light switch adjusting nut

U1BF20E0.book Page 21 Thursday, April 9, 2009 9:10 AM

«
...
60
61
62
63
64
...
»

Summary of Contents for 2010 V Star XVS650AZ





























































































Reviews:

No comments

Related manuals for 2010 V Star XVS650AZ

Brand: Öhlins Pages: 8

Brand: SSR Motorsports Pages: 39

Brand: GYS Pages: 36

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 118

Brand: Yamaha Pages: 110

Brand: Yamaha Pages: 120

Brand: Yamaha Pages: 216

Brand: Yamaha Pages: 380

Brand: Yamaha Pages: 658

Brand: Yamaha Pages: 106

Brand: DYNATEK Pages: 5

Brand: Kobalt Pages: 33

Brand: Ducati Pages: 27

Brand: Shad Pages: 2

Brand: Shad Pages: 2

NADSA TOPMASTER Y0VR33ST

Brand: Shad Pages: 2

Brand: Shad Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands