6-33
FI
1
THROTTLE BODY AND FUEL INJECTOR
INSTALLING THE FUEL PUMP
1. Install :
8
fuel pump
4Nm (0.4m • kgf, 2.9ft • lbf)
TIP
8
Do not damage the installion surface of the
fuel tank when installing the fuel pump.
8
Always use a new fuel pump gasket.
8
Align the projection
a
on the fuel pump with
the alignment mark
b
on the fuel tank.
8
Tighten the fuel pump bolts in the proper
tightening sequence as shown and torque
them in two stages.
A
Forward
INSTALLING THE FUEL TANK AND FUEL
HOSE
1. Install :
8
fuel tank
10Nm (1.0m • kgf, 7.2ft • lbf)
2.
Connect :
8
fuel pump coupler
T
R
.
.
T
R
.
.
3.
Install :
8
fuel hose
1
8
fuel return hose
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose holders are in the correct position,
otherwise the fuel hose will not be properly
installed.
TIP
8
Install the fuel hose connector securely onto
the fuel tank until a distinct “click” is heard,
and then make sure that it does not come
loose.
8
After instslling the fuel hose, hold fuel hose
connector
1
push to the bottom up and
make sure that it is installed securely.
1
