manualshive.com logo in svg

Yamaha 2009 Waverunner FZR, Owner'S Manual

Share
Download
Yamaha 2009 Waverunner FZR Owner'S Manual Download Page 26

Safety information

21

Remember, markings may vary by geograph-
ic location. Always consult local boating au-
thorities before riding your watercraft in
unfamiliar waters.

EJU30980

To get more boating safety 

information 

Be informed about boating safety. Additional
publications and information can be obtained
from many organizations, including the follow-
ing.

United States Coast Guard

Consumer Affairs Staff (G-BC)
Office of Boating, Public, and Consumer Af-
fairs
U.S. Coast Guard Headquarters
Washington, D.C. 20593-0001
Boating Safety Hotline: 1-800-368-5647

Other sources

You can find local rules by contacting the Na-
tional Association of State Boating Law Ad-
ministrators, or your local Power Squadron.

Watercraft Education and Training

The Online Boating Safety Course, available
through the watercraft section of the yamaha-
motor.com website, is a free, 50 question
learning course available to the public. Upon
successful completion of 80 percent or better,
the user can request a certificate of comple-
tion by mail or can download one immediate-
ly. The Online Boating Safety Course,
provided by the Boat/US Foundation, is ap-
proved by the National Association of State
Boating Law Administrators (NASBLA) and
recognized by the United States Coast
Guard. This course meets the education re-
quirement for those states that recognize non-
proctored, NASBLA-approved courses.
Yamaha is the watercraft industry’s leading
manufacturer to build awareness and support
for boating education. In 1997, Yamaha
launched its GET W.E.T. (Watercraft Educa-
tion and Training) initiative and has since
reached out to over one million Americans
promoting the benefits of boating education.

UF2R10E0.book  Page 21  Friday, October 31, 2008  9:14 AM

Summary of Contents for 2009 Waverunner FZR









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands