Yamaha 2009 WaveRunner FX Cruiser SHO, Owner'S Manual, Page: 56 / 118

Features and functions
51
check engine warning indicator begin to blink,
and the buzzer sounds intermittently.
If this occurs, reduce the engine speed, return
to shore, and have a Yamaha dealer check
the engine.
TIP:
Press any button on the multifunction informa-
tion center to stop the buzzer.
EJU35034
Right multifunction display and operation
buttons (for FX Cruiser SHO)
The right multifunction display shows the fol-
lowing information.
●
Compass
●
Average speed
●
Tripmeter
●
Trip timer
●
Fuel consumption per hour
●
Fuel consumption per kilometer/mile
●
Water temperature
●
Air temperature
The following operation buttons are on the
right side of the multifunction information cen-
ter.
To switch the display mode, push the
“Mode/Reset” button for less than 1 second.
The display mode changes in the following or-
der.
Compass
→
Average speed
→
Tripmeter
→
Trip timer
→
Fuel consumption per hour
→
Fuel consumption per kilometer/mile
→
Water
temperature
→
Air temperature
To switch the display units between kilome-
ters/liters/degrees Celsius and miles/gal-
lons/degrees Fahrenheit, push the
“Volt/Hour” button for at least 1 second, within
10 seconds after the multifunction information
center starts operating.
The “SPEED” indicator light blinks three times
if miles/gallons/degrees Fahrenheit are se-
lected as the display units when the multifunc-
tion information center starts operating, or if
1 “Mode/Reset” button
2 “Start/Stop” button
UF1W11E0.book Page 51 Tuesday, May 27, 2008 8:50 AM