background image

Operation

46

To store the fire extinguisher, unhook the
band and remove the cover. Place the fire ex-
tinguisher in the holder, and then place the
cover over the fire extinguisher. Fasten the
cover and the fire extinguisher with the band
securely.

To check the fire extinguisher, see the instruc-
tions supplied by the fire extinguisher manu-
facturer. Always keep the fire extinguisher
secured in the holder with its cover in place.
Always carry a fire extinguisher on board. A
fire extinguisher is not standard equipment
with this watercraft. If you do not have one,
contact a Yamaha dealer or a fire extinguisher
dealer to obtain one meeting the proper spec-
ifications.

EJU32591

Throttle lever 

Check the throttle lever for proper operation.
Squeeze and release the throttle lever several
times to make sure that there is no hesitation
in its travel. It should be smooth over the com-

plete range and spring back to the idle posi-
tion when released.

EJU32600

Steering system 

Check the handlebars for looseness.
Turn the handlebars as far as possible to the
right and left to make sure that operation is
smooth and unrestricted throughout the
whole range. Also, make sure that the jet
thrust nozzle moves as the handlebars are
turned, and that there is no free play between
the handlebars and the jet thrust nozzle.

EJU32632

Shift lever and reverse gate 
(for VX Deluxe/VX Cruiser) 

WARNING

EWJ00031

Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.

Check the shift lever and reverse gate for
proper operation.

1

Fire extinguisher holder and cover

2

Band

UF2L20E0.book  Page 46  Thursday, May 29, 2008  9:51 AM

Summary of Contents for 2009 Wave Runner VX Deluxe



























































































Reviews: