Yamaha 2009 V Star XVS650AY Owner'S Manual Download Page 72

Page: 72 / 92

PERIODIC MAINTENANCE AND ADJUSTMENT

7-30

EAU24283

Replacing a turn signal light
bulb or the tail/brake light bulb

1. Remove the lens by removing the

screws.

XVS650Y

XVS650AY

2. Remove the burnt-out bulb by

pushing it in and turning it counter-
clockwise.

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the lens by installing the

screws.

NOTICE:

Do not over-

tighten the screws, otherwise
the lens may break.

[ECA10681]

EAU33413

Replacing the auxiliary light
bulb (XVS650AY)

If the auxiliary light bulb burns out, re-
place it as follows.

1. Remove the headlight unit by re-

moving the screws.

2. Remove the socket (together with

the bulb) by pushing it in and turn-
ing it counterclockwise.

1. Screw

U3B723E0.book Page 30 Monday, April 14, 2008 9:05 AM

Summary of Contents for 2009 V Star XVS650AY





























































































Search results

Summary of Contents for 2009 V Star XVS650AY

Reviews:

Related manuals for 2009 V Star XVS650AY

Brands by name

Popular brands

Yamaha 2009 V Star XVS650AY, Owner'S Manual

Search results

Summary of Contents for 2009 V Star XVS650AY

Reviews:

Related manuals for 2009 V Star XVS650AY

Brands by name

Popular brands