background image

 

9-1

 

1

2

3

4

5

6

7

8

9

 

CONSUMER INFORMATION

 

EAU26351

 

Identification numbers 

 

Record the key identification number,
vehicle identification number and mod-
el label information in the spaces pro-
vided below for assistance when
ordering spare parts from a Yamaha
dealer or for reference in case the vehi-
cle is stolen.
KEY IDENTIFICATION NUMBER:

VEHICLE IDENTIFICATION 
NUMBER:

MODEL LABEL INFORMATION:

 

EAU26381

 

Key identification number 

 

The key identification number is
stamped into the key tag. Record this
number in the space provided and use
it for reference when ordering a new
key.

 

EAU26400

 

Vehicle identification number 

 

The vehicle identification number is
stamped into the steering head pipe.
Record this number in the space pro-
vided.

NOTE:

 

The vehicle identification number is
used to identify your motorcycle and
may be used to register your motorcy-
cle with the licensing authority in your

 

area.

 

1. Key identification number

1

 

1. Vehicle identification number

1

Summary of Contents for 2008 WR250X





































































































Reviews: