Yamaha 2006 SuperJet 700 Owner'S/Operator'S Manual Download | Manualshive

Page: 12 / 111

background image

1-7

E

EJU01177

Safety information

The safe use and operation of this

watercraft is dependent upon the use of
proper riding techniques, as well as upon
the common sense, good judgment, and
expertise of the operator. Every operator
should know the following requirements
before riding the watercraft.

●

Before operating the watercraft, read the
Owner’s/Operator’s Manual, the Riding
Practice Guide, the Riding Instruction
card and all warning and caution labels
on the watercraft. Also, watch the Basic
Orientation Video provided with your
watercraft. These materials should give
you an understanding of the watercraft
and its operation.

●

Never allow anyone to operate this water-
craft until they too have read the Owner’s/
Operator’s Manual, the Riding Practice
Guide, the Riding Instruction card and all
warning and caution labels, and if possi-
ble watched the Basic Orientation Video.
Showing them the video may help rein-
force the information contained in these
materials.

EJU01143

Limitations on who may
operate the watercraft

●

Yamaha recommends a minimum opera-
tor age of 16 years old.
Adults must supervise use by minors.
Know the operator age and training
requirements for your state. A boating
safety course is recommended and may
be required in your state. You can find
local rules by contacting the United
States Coast Guard (USCG), the National
Association of State Boating Law Admin-
istrators, or your local Power Squadron.

●

This watercraft is designed to carry the
operator only. Never have more than one
person on the watercraft at any time.

E_F1N-10.book Page 7 Thursday, June 2, 2005 9:56 AM

«
...
10
11
12
13
14
...
»

Summary of Contents for 2006 SuperJet 700
















































































































Reviews:

No comments

Related manuals for 2006 SuperJet 700

Brand: NEILPRYDE Pages: 4

Brand: RS SAILING Pages: 70

Brand: OUYANG Pages: 16

Brand: Maxxon Pages: 6

Brand: Sea-doo Pages: 118

Tribord DINGHY 5S

Brand: Decathlon Pages: 36

Brand: CORRECT CRAFT Pages: 228

Brand: Hunter Pages: 206

Brand: buster Pages: 46

Brand: Nortik Pages: 34

Brand: Polaris Pages: 90

Brand: World Cat Pages: 50

Brand: World Cat Pages: 50

Brand: World Cat Pages: 38

Brand: World Cat Pages: 68

Brand: Sea-doo Pages: 105

Brand: Trophy Pages: 96

Brand: Hobie Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands