Yamaha 2004 WaveRunner FX Cruiser High Output Owner'S/Operator'S Manual Download Page 107 | Manualshive

Page: 107 / 144

background image

4-8

E

NOTE:

@

A service manual is available for purchase
through a Yamaha dealer for owners who
have the mechanical skills, tools, and other
equipment necessary to perform mainte-
nance not covered by this Owner’s/Opera-
tor’s Manual.

@

EJU18740

Owner’s/Operator’s Manual
and tool kit

It is advisable always to carry the

Owner’s/Operator’s Manual and tool kit

2

with you whenever you use the watercraft.
For your convenience, a storage compart-
ment

1

is provided on the watercraft for the

manual and tool kit.

NOTE:

@

To protect these materials from water dam-
age, it would be a good idea to put them in a
waterproof bag. If your Owner’s/Operator’s
Manual is damaged, order a replacement
from a Yamaha dealer.

@

The service information included in this

manual is intended to provide you with the
necessary information for completing your
own preventive maintenance and minor
repairs. The tools provided in the tool kit are
sufficient for this purpose.

UF1S10.book Page 8 Wednesday, December 17, 2003 1:11 PM

«
...
105
106
107
108
109
...
»

Summary of Contents for 2004 WaveRunner FX Cruiser High Output

















































































































































Reviews:

No comments

Related manuals for 2004 WaveRunner FX Cruiser High Output

Brand: RS SAILING Pages: 70

Brand: TALAMEX Pages: 55

Brand: Edgewater Networks Pages: 49

Brand: Hobie Pages: 26

Brand: Cobalt Digital Inc Pages: 122

Brand: Pelican Pages: 14

Brand: NW Explorations Pages: 59

Brand: J/Boats Pages: 58

Brand: Hallberg-Rassy Pages: 130

Brand: Ranger Tugs Pages: 40

52 Sedan Bridge

Brand: Sea Ray Boats Pages: 220

Brand: Sevylor Pages: 72

SUPERCARAVELLE XR116GTX-7

Brand: Sevylor Pages: 104

Brand: RedShark Bikes Pages: 35

Banana Boat Water Sled

Brand: ISLAND HOPPER Pages: 12

32 Corsair (RK)

Brand: Chris-Craft Pages: 149

Brand: Silverton Pages: 210

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands