– 18 –
ENG
CYLINDER HEAD
ENGINE
CYLINDER HEAD
CYLINDER HEAD INSTALLATION
1.Install:
●
Cylinder head
●
Bolt (M10)
●
Bolt (M6)
NOTE:
●
Lubricate the washer with engine oil.
●
Tighten the bolts (M10) in two stages and a
crisscross pattern.
T
R
.
.
40 Nm (4.0 m • kg, 29 ft • lb)
T
R
.
.
10 Nm (1.0 m • kg, 7.2 ft • lb)
2.Install:
●
Camshaft sprocket
***********************************************
Installing steps:
●
Rotate the camshaft to align the camshaft
pin
1
with the cylinder head match mark
2
.
●
Turn the crankshaft counterclockwise with a
wrench.
●
Align the “T” mark
3
on the rotor with the
stationary pointer
4
on the crankcase cover.
When the “T” mark is aligned with the sta-
tionary pointer, the piston is at the Top Dead
Center (T.D.C.).
CAUTION:
Do not turn the crankshaft during the cam-
shaft sprocket installation.
●
Place the timing chain onto the camshaft
sprocket.
●
Install the camshaft sprocket onto the cam-
shaft and finger tighten the sprocket bolt.
