19
K The wire harness, the taillight
lead wires, and the rear left and
right flasher lead wires must be
arranged below the rib of the rear
fender.
L Clamp the wire harness and the
rear left and right flasher lead
wires.
The front end of the clamp must
be directed forward.
M Pass the rear left and right flash-
er lead wires through the respec-
tive holes in the rear fender.
H Match the wire harness, the
main switch lead wire, and the
meter lead wire, to the wire har-
ness and main switch lead wire
positioning tapes, and bundle
the harness and the lead wires
by use of the band.
I The lead wires must be clamped
in this area.
J Bundle the front left and right
flasher lead wires by use of the
clamp.
E Insert the left lead wire of the
handle switch and the left lead
wire of the front flasher into the
left of the headlight lower hole.
F Insert the right lead wire of the
handle switch and the right lead
wire of the front flasher into the
right of the headlight lower hole.
G Bundle the handle switch lead
wire and brake hose 2, near the
guide wire of the stay headlight
by use of this band.
SPEC
CABLE ROUTING
