CABLE ROUTING
SPEC
tween engine and swingarm.
M Route the neutral switch lead be-
tween engine and swingarm.
N Route the air vent hose and over
flow hose through the engine
guide.
O To the fuel cock.
P Route the horn lead through in-
side the clutch cable.
Q Insert the starter cable to the
clamp.
side, then cut it.
H Clamp the sidestand switch
lead.
I Clamp the air vent hose, over
flow hose, starter motor lead and
neutral switch lead.
J Hold down the side stand switch
lead using the special washer.
K Route the air vent hose and over
flow hose between engine and
swingarm.
L Route the starter motor lead be-
E Clamp the rectifier / regulator
lead and resonator hose. Point
the surplus part toward the inner
side. Clamp within a range
where the resonator hose pro-
tector is torn. Do not pinch the
resonator hose.
F Place the air vent hose in the in-
ner side of the main pipe.
G Clamp the C.D.I. magneto lead
at the frame pipe bend and point
the surplus part to the inner
–11–
Summary of Contents for 2002 TW125
Page 1: ......
