Yamaha 2001 YZF-R6M, Owner'S Manual

Page: 29 / 117

INSTRUMENT AND CONTROL FUNCTIONS
3-8
3
Clock mode
To change the display to the clock
mode, push both the “SELECT” and
“RESET” buttons.
To change the display back to the
odometer mode, push the “RESET”
button.
To set the clock
1. Push both the “SELECT” and
“RESET” buttons for at least two
seconds.
2. When the hour digits start flashing,
push the “RESET” button to set
the hours.
3. Push the “SELECT” button to
change the minutes.
4. When the minute digits start flash-
ing, push the “RESET” button to
set the minutes.
5. Push the “SELECT” button to start
the clock.
NOTE:
@
After setting the clock, be sure to push
the “SELECT” button before turning the
main switch to “OFF”, otherwise the
clock will not be set.
@
EAU00101
Tachometer
This model is equipped with an electric
tachometer so the rider can monitor the
engine speed and keep it within the
ideal power range.
EC000003
CAUTION:
@
Do not operate in the red zone.
Red zone: 15,500 r/min and above
@
1. Tachometer
2. Red zone
E_5eb_Functions.fm Page 8 Monday, February 7, 2000 9:01 AM