Yamaha 1009MWTO-F0 Owner'S Manual Download

Page: 43 / 80

anel Oper

ation and Displa

Utility Displays

DME64N/DME24N Owner’s Manual

Utility Displays

Most basic DME64N/24N functions can be accessed via the Utility Display.

Items accessible via the Utility display

Page

Item

Description

Manual Page

Info

Current status and settings for the devices basic parameters.

Page 45

Label

Name display.

Version

The device’s current version number.

Date

Current status and setup for the internal calendar/clock.

Battery

Shows the status of the internal battery.

Net

Current status and settings for the Ethernet network.

Page 46

MASTER/SLAVE

Displays current status and determines whether the device is device group master or not.

IP Adr.

Current status and setup for the device’s IP address.

Master ID

Displays and sets the device group master host address.

Link Mode

Current status and setup for the [NETWORK] connector.

MAC Adr.

Displays the device’s MAC address.

Disp

Current status and setup for the display mode, etc.

Page 46

LCD Contrast

Current status and setup for display panel contrast.

LCD Backlight

Current status and setup for the display panel backlight.

Meter Fall Time

Current status and setup for meter fall time.

Lock

Current status and setup for panel lock and related functions.

Page 47

Utility

Current status and setup for the Utility display settings.

Panel Lock Boot

Current status and setup for the DME64N/24N’s power-on panel lock status.

Panel Lock Target

Current status and setup for the panel lock target.

User Defined Lock

Panel lock and setup for each page of User Defined Button.

Misc

Current status and setup for settings not included in other pages.

Page 48

Scene Store

Current status and setup for scene store accessibility.

Last Mem. Resume Indicates and determines whether the previous memory contents will be retained when the

unit is restarted.

Event Scheduler

Current status and setup whether an event schedule setup in the DME Designer will be
executed or not.

Remote

Rmt Ctrl

Displays/sets the connector and connection type to be used for DME remote control
protocol communication.

Page 48

Int HA Ctrl

Displays/sets the connector to be used for internal head amp control.

Ext HA Ctrl

Displays/sets the type of connection to be used for external head amp control.

COM

Displays/sets the type of connection to be used for DME protocol communication.

MIDI

Current status and setup for MIDI functions.

Page 49

Port

Current status and setup of the MIDI port.

Protocol

Displays/sets the protocol to be used for communication with devices connected via MIDI.

Current status and setup for the MIDI transmit and receive channels.

Program Change

Current status and setup for program change transmission/reception, omni on, and echo
on/off.

Control Change

Current status and setup for control change transmission/reception, omni on, and echo
on/off.

Param Change

Current status and setup for parameter change transmission/reception, omni on, and echo
on/off.

WCLK

Current status and selection of the DME64N/24N word clock.

Page 50

Displays the word clock frequency.

Int

Current status of the internal word clock.

WCIN

Current status of the word clock received at the [WORD CLOCK IN] connector.

Cascade

Current status of the word clock received via the [CASCADE IN] and [CASCADE OUT]
connectors.

SLOT1-4

Current status of the word clock received via cards plugged in to the I/O card slots.

Summary of Contents for 1009MWTO-F0

















































































Search results

Summary of Contents for 1009MWTO-F0

Reviews:

Related manuals for 1009MWTO-F0

Brands by name

Popular brands

Yamaha 1009MWTO-F0, Owner'S Manual

Search results

Summary of Contents for 1009MWTO-F0

Reviews:

Related manuals for 1009MWTO-F0

Brands by name

Popular brands