Set
up
I/O Card Installation
DME64N/DME24N Owner’s Manual
20
I/O Card Installation
The DME64N has four I/O card slots, and the DME24N has one I/O card slot. The number of audio input channels
available on the DME64N/24N can be increased by plugging the appropriate mini-YGDAI I/O card(s) into the available
card slot(s).
Compatible I/O Cards
As of June, 2010, Yamaha mini-YGDAI cards that can be used with the DME64N/24N are as follows:
The input/output numbers above apply to 44.1/48kHz operation.
(*)
In order to use three or four MY16-C cards, firmware V1.10 or later will be required.
If the serial number written on the upper surface of your DME64N is shown below, a hardware upgrade is needed.
KK, KL, KM, KN, KO, KP, KX, KY are the third and fourth digits of the serial number.
A fee is charged for the hardware upgrade.
For details, contact Yamaha customer support using the contact information located at the end of the “DME64N/24N Owner’s
Manual.”
http://www.yamahaproaudio.com/
Card Name
Function
Input
Output
No. of Available Cards
DME64N
DME24N
MY8-AT
ADAT
8
8
4
1
MY8-TD
TDIF-1
8
8
4
1
MY8-AE
AES/EBU
8
8
4
1
MY4-AD
ANALOG IN
4
–
4
1
MY8-AD
ANALOG IN
8
–
4
1
MY4-DA
ANALOG OUT
–
4
4
1
MY8-AD24
ANALOG IN
8
–
4
1
MY8-AD96
ANALOG IN
8
–
4
1
MY8-DA96
ANALOG OUT
–
8
4
1
MY8-ADDA96
ANALOG IN/OUT
8
8
4
1
MY8-AE96S
AES/EBU
8
8
4
1
MY8-AE96
AES/EBU
8
8
4
1
MY8-AEB
AES/EBU
8
8
4
1
MY16-AT
ADAT
16
16
4
1
MY16-AE
AES/EBU
16
16
4
1
MY16-TD
TDIF-1
16
16
4
1
MY16-C
CobraNet
16
16
4(*)
1
MY16-CII
CobraNet
16
16
4
1
MY16-ES64
EtherSound
16
16
1
1
MY16-MD64
MADI
16
16
4
1
MY16-EX
Expansion
16
16
3
1
MY8-SDI-D
HD-SDI
8
–
4
1
