162
Chapter 15—Scene Memories
02R96 Version 2—Owner’s Manual
15 Scene Memories
About Scene Memories
Scene memories allow you to store a snapshot of virtually every 02R96 mix setting in a
Scene. There are 99 Scene memories, and they can be titled for easy identification. Scenes
can be linked to Input and Output Patch library memories, so that input and output
patches are recalled along with Scenes. A fade time of up to 30 seconds can be set individu-
ally for each Input and Output Channel fader. Recall Safe can be used to exclude individual
Input and Output Channels and certain parameters from Scene recalls. Stored Scenes can
be sorted as necessary.
Scenes can be stored and recalled by using the SCENE MEMORY [STORE] and [RECALL]
buttons, or by using the Scene Memory page. Scenes can be assigned MIDI Program
Change numbers and recalled remotely. See “Assigning Scenes to Program Changes” on
page 193 for more information. When a Scene is recalled on the 02R96, the Program
Change number assigned to that Scene is transmitted, which can be used to recall programs,
effects, etc., on other MIDI equipment. In addition, manual Scene recalls can be recorded
on-the-fly in an Automix. When that Automix is replayed, the Scenes are recalled automat-
ically. See “Automix” on page 170 for more information.
Scene memories can be stored to external MIDI device, such as a MIDI data filer, by using
MIDI Bulk Dump (see page 195).
What
’
s Stored in a Scene?
The following items are stored in Scenes: Input and Output Channel settings, Effects set-
tings, Group and Pair settings, Fade Time settings, and Scene title.
Edit Buffer & Edit Indicator
The Edit Buffer is where the current mix settings (i.e., the current Scene) are stored. When
a Scene is stored, the mix settings in the Edit Buffer are written to the selected Scene mem-
ory. When a Scene is recalled, the contents of the selected Scene memory are copied to the
Edit Buffer, making them the current mix settings.
When a parameter is adjusted after a Scene has been recalled, the Edit indicators—the dot
on the SCENE MEMORY display and “EDIT” on the display—appear, indicating that the
current mix settings (i.e., those in the Edit Buffer) no longer match those of the Scene that
was recalled last, as illustrated below.
The contents of the Edit Buffer are retained while the 02R96 is turned off.
02
02
SCENE MEMORY display
Display
Scene #2 has just been recalled, so
the contents of the Edit Buffer
match those of Scene #2 and the
Edit indicators are off.
A parameter has been adjusted since
Scene #2 was recalled, so the Edit
indicators appear, indicating that the
contents of the Edit Buffer no longer
match those of Scene #2.
