background image

 

 

1/1

 

- Preface 

Thank you for purchasing a Yamada Pump. This is a hand operated lever type pump suitable for grease up to NLGI 
No.0. The machine can keep a large quantity of grease in its cabinet and is most suitable for lubrication work in an 
outdoor place where no compressor is available. Use of high viscosity grease will produce air pockets and result in 
operation failure. 

 

-  For Safe Operation 

This manual describes the items that are important for the user to operate this product safely, correctly, and efficiently. 
Before operating this product, read this manual thoroughly, in particular, “Warnings and Cautions” at the beginning of 
this manual. 
 

-  Warnings and Cautions 

For safe use of this product, be sure to note the following: In this document, warnings and cautions are indicated by 
symbols. These symbols are for those who will operate this product and for those who will be nearby, for safe 
operation and for prevention of personal injury and property damage. The following warning and caution symbols 
have the meanings described below. Be sure to remember their meanings. 
 

WARNING 

This indicates the existence of potential hazard which, if not avoided, will 

result in death or serious injury. 

CAUTION : 

This indicates the existence of potential hazard which, if not avoided, may 

result in bodily injury or in physical damage. 

Furthermore, to indicate the type of danger and damage, the following symbols are also used along with those 
mentioned above: 

   

This symbol indicates a DON'T, and will be accompanied by an explanation on something you must not 
do.  

 

This symbol indicates a DO, and will be accompanied by instructions on something you must do in a 
certain situation. 

 

-  Precautions on Use 

The following warnings and cautions are very important. Be sure to observe them. 

WARNING 

-  Gasoline is a high-volatility fuel. Do not use it to clean the pump in any case. Otherwise,   

ignition or explosion may be caused. 

-  Some types of grease to be used may contain carcinogens. Read the precautions provided by grease 

manufacturer thoroughly and handle the grease with care. 

 

CAUTION 

This pump is suitable only for grease. Do not use any other solvents. 

 

-  Use of high viscosity grease will produce air pockets and result in operation failure. Do not use anything 

harder than No.0 grease. 
If you would like to use high viscosity grease, please contact our business office. 

 

 

 

 

 

 

 

Summary of Contents for SK-55













Reviews: