2/2
- Precautions on Use
The following warnings and cautions are very important. Be sure to observe them.
WARNING
- Gasoline is a high-volatility material. Do not use gasoline to clean the pump in any case, otherwise it
may cause ignition or explosion.
- Remodeling this machine may result in a bodily accident or failure. Do not remodel the machine in any
case, otherwise it will invite danger.
- The material to be discharged from this machine may become a hazardous object depending on its
nature. Be sure to discharge it in a vessel. Do not discharge it directly on the ground.
- This machine users aluminum alloy for the liquid contact section of machine and NBR for the seal
section, respectively. Any solvent or chemical which corrode these materials is not available.
If used, corrosion could lead to a liquid leak, resulting in damages on the human body or properties.
- If the material handled come into direct contact with or is splashed over your body, it could be harmful
to the eye or skin. Be sure to check the material handled, and when you work with it, put on a
protective gear (protective mask, glasses, safety gloves, etc.) depending on the degree of danger.
- Some types of grease may contain a carcinogenic material. Read the cautions for handling grease
given by the grease maker carefully when handling the grease.
CAUTION
- Do not operate the gun lever with the discharge port facing to another person during machine operation
in any case. A direct hit against the human body may result in an accident such as skin damage.
- The operator or administrator of this pump should not allow those who have no knowledge of the pump
to operate it.
- Silicone grease is not applicable to this pump. It may cause extremely short lifetime of the pump or
pump damage.
- After the end of daily work, at night, and on holidays, be sure to shut off the power air to this machine to
release the gun so as to bleed the internal pressure. Any secondary accident such as pollution of
installation, due to pump operation driven by worn-away packing or hose without shutting off the supply
air, shall be attributable to the user’s responsibility.
- When replacing any part at maintenance, be sure to stop the air supply to the machine to avoid having
fingers nipped because of a malfunction.
- Use of the pump for other than its intended purpose could lead to personal injuries or damages on
properties. Use the pump based on the product specifications.