6
■
C Spool Valve Assembly
- Use a flat-blade screwdriver to raise the outside of the C
spring so that the outside can be opened, and remove the C
spring. [Fig.5.5 and 5.6]
＜
NOTE
＞
- When you remove the C spring, the arm is removed also.
- Use the snap ring plyer to remove the interlocking bush from
the spool while opening and pushing the groove of the
interlocking bush. [Fig.5.7 and 5.8]
＜
NOTE
＞
- Do not exert any excessive force to the spool.
- Do not open the groove of the interlocking bush more widely
than it has to.
- When you remove the interlocking bush, the spring retaining
cushion is removed also.
5.2 Inspection
- Spool [Fig.5.9]
Measure the outside diameter, and if it is out of the allowable
range, replace the spool with a new one.
Allowable range of the Spool
φ
15.73 -
φ
15.80 mm
Fig.5.5
Fig.5.6
Fig.5.7
Fig.5.8
Fig.5.9