YAMADA 880132 Instruction Download Page 3

 

2

1. Purpose of use 

This machine is a pump to supply oil, in particular, high-viscosity oil to construction machines by 
using a lever type manual pump.    It cannot be used for grease.    The machine can keep a large 
quantity of oil in its cabinet and is most suitable for lubrication work in an outdoor place where no 
compressor is available.    The oil supply port base is a button head type that permits quick and 
sure lubrication. 
 

2. Warning / Caution 
 

2-1.Definition of warning and caution 

WARNING 

The following definitions and warning indications are given to specify "warning" and "caution" in 
this instruction manual. 
A warning indication is indispensable to your safe work. 
Be sure you understand these indications well before use since the important items to prevent 
personal injury and physical damage are described on it. 

Warning:

 Given when it is assumed that mishandling may cause death or serious injury. 

Caution:

 Given when it is assumed that mishandling may cause injury and physical 

damage. 

*

NOTE

The above labels are intended to improve efficient operation and perform device 

maintenance.

 

3

Precautions 

 

WARNING 

- Some types of oil to be used may contain carcinogens.    Read the precautions provided by oil 

manufacturer thoroughly and handle the oil with care. 

- Gasoline is a high-volatility fuel.    Do not use it to clean the pump in any case.    Otherwise, 

ignition or explosion may be caused. 

 

CAUTION

 

- This machine is a pump for high-viscosity oil.    The machine cannot be used for gasoline, light 

oil, kerosene, and other solvents. 

For your safe use 

A warning label is affixed on this product and with which precautions are described to call 
attention to your safe use. 
Never fail to observe precautions to prevent any personal injury, physical damage, and accidents

 

Be sure to observe warning and caution described below since they are very important. 

CAUTION

WARNING 

 

Summary of Contents for 880132













Reviews: