26
YA3702-210727
EN
NL
DE
EN
4x Chemical anchor e.g. Hilti
HIT 170 with 8.8 anchor M12
(in combination with C20/C25
concrete)
A. PREPARATION
A.1
Transportation advice
WARNING
Not taking the right precautions
could result in accidents and/or damage.
WARNING
When using heavy equipment
follow the safety instructions provided by the
manufacturer.
• Before transporting, check the box and pallet
for any damage or loose parts
• When using (heavy) equipment make sure the
person is certified when required to use the
equipment
• Always transport the product upright
• Always use the supplied pallet and transport
materials
• Extra equipment may be necessary to safely
transport the product
• Make sure the used equipment can handle the
weight and size of transporting the product
• Transport the product as close as possible
to the eventual place of installation before
unpacking the product
• When moving the Fono out of the packaging,
we recommend using a forklift. When using a
crane: Only lift with use of a crane leveller. Only
lift the product vertically!
A.2
Dimensions of the installed Fono
A.3
Overview of all parts
CAUTION
The person unpacking the product
should wear the required protection and clothing.
CAUTION
Do not unpack the product before
transporting it to the eventual place of installation
to prevent damages.
• Use a forklift or crane to load and unload the
pallets
• Use a cross slot screwdriver (not included) to
open the wooden crate
• Unpack the product in a dry environment
• While unpacking the product check the product
for any damages or missing parts
• Check cables for any damages
• Please recycle and discard the packaging
material correctly
A.4
Make sure there is at least 1,5 meters (5 ft)
distance between the Fono field and surrounding
objects.
A.5
Make sure the power cable is located in the
left foot of the DJ-side of the Fono as shown in
the image. The cable should have an overlength
of approximately 2m [78.7”]. *Use local standards
to determine how deep electrical wires need to be
buried.
A.6
Make sure the power cable is disconnected
during the installation.
A.7
Prepare the ground:
• Make sure the surface exists of at least 15cm
[5.9”] solid concrete
• Make sure the surface is level in all directions
NOTICE
For placement on soft surface (grass)
it is recommended to make a concrete base with
sufficient anchoring to put the Fono on.
B. INSTALLATION
WARNING
Make sure the necessary
preparations have been made according to chapter
A.
CAUTION
The person unpacking, installing and
transporting the product should wear the required
protection and clothing.
B.1
Remove the left speaker cover.
Summary of Contents for Fono
