1
2
3
4
1
2
3
4
Remote control, arming the alarm
Remote control, arming the alarm
Remote control, disarming the alarm
Low battery indicator function
Press the locked padlock icon on the
remote control to arm the main alarm.
When the light is on, it means the battery
is low and needs to be changed.
After hearing a beep sound, you have 30
seconds to leave the alarm area.
If the alarm is not going to used for a long
time, the battery should be removed.
You will have 5
seconds upon
detection to disarm
the alarm by using
the unlocked
padlock symbol,
once this has been
pressed and
acknowledged the
red light will flash on
the main alarm.
PLEASE NOTE:
1. Every step of the operations listed above for each device must completed within 5 seconds. any longer than five
seconds and the device will automatically revert to an unarmed state.
2. You can learn up to 20 accessories.
3. For two different accessories to pair with each other, both devices must be set to ‘learn’ mode.
If the main alarm is not
disarmed the siren will
sound for 30 seconds upon
detection, the main alarm
will then automatically go
back to its armed state.
14
