16
17
Safety Feature
Settings
Open / Close Button setting Feature
It enable you set the Open / Close button
Volume Setting Feature
It enables you adjust the sound volume.
》 Volume Setting
Press
(Registration)
button
➞
1
Enter
➞
2
MUTE : ,
LOW : ,
HIGH : ,
➞
3
4
Press
(Registration)
button
》 Open / Close Button ON/OFF setting
Press
(Registration)
button
➞
1
Enter
➞
2
Enter number
and
on the keypad
➞
3
4
Press
(Registration)
button
Directions
》 Damage Alarm
Damage:
When the Front Body was damaged
due to forced separation or drilling,
the alarm will sound.
Alarm Feature
The alarm sound continues for 30 minutes or until it is reset.
To Release Alarm
Method ❶
Enter the registered User PIN Code.
Method ❷
Enter the registered Card Key.
Method ❸
Press the interior Ⓡ button for 5 seconds.
The default setting : High
•Even when the Inside Forced Lock mode is set,
the High Temperature Alarm releases the lock status
automatically.
》 High Temperature Alarm
•When there’
s high temperature of the inside.
It not only raises an alarm but also releases the lock
status automatically.
Method ❶
Enter the registered User PIN Code.
Method ❷
Enter the registered Card Key.
Method ❸
Press the interior Ⓡ button for 5 seconds.
•
If a door is open when the Auto Lock is not properly operated, the Trespass Alarm might go off.
•
If the Back body is exposed to direct sunlight for a long time, the temperature sensor may operate and
go off an alarm.
•
Even when the Inside Forced Lock mode is set, the lock status will automatically be released if the High
Temperature Alarm goes off.
•
If the alarm goes off due to damage, fire, or trespass, the numbers on the keypad will light up clockwise.
(It repeats the status for 30 minutes with alarm sound.)
Note
Release High Temperature Alarm
