4. If you do not have a home already created, create a new home when prompted. Tap + to add
a new Yale Lock.
1. After following steps listed on other side of page for enrolling module, download the Yale
®
Secure app from App Store .
3. Open the Yale Secure app and agree to allow app to access your Home Data.
®
®
®
®
2. Ensure Bluetooth is enabled on your iPhone , iPad or iPod touch , and that you're within a
foot of your Yale lock.
6. Scan your Accessory Setup Code; shown below, or manually enter within the app.
5. The app will search for your Yale Lock. Be sure that you are within close proximity (less than
two feet or so). When "Yale Lock" appears, tap to add.
*If lock does not appear, enter your Master Pin Code on lock keypad, tap gear, tap 7, tap
gear, tap 1 and then tap gear.
Connecting the Yale Secure App with the Yale iM1 Network Module
Accessory Setup Code
®
Yale Secure App Connection
®
with Yale iM1 Network Module
®
Product Support Tel 1-855-213-5841 • www.yalehome.com
Reproduction in whole or in part without the express written permission of ASSA ABLOY Residential Group is prohibited.
Apple®, iPhone®, iPad®, iPod touch® and Siri® are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. Use of the Works with Apple HomeKit logo means that an electronic accessory
has been designed to connect specifically to iPod touch, iPhone or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Use of the HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
Yale®, Yale Real Living® and Assure Lock® are registered trademarks of ASSA ABLOY Residential Group. nexTouch™ is a trademark of ASSA ABLOY Residential Group. Other products’ brand names may be trademarks or registered
trademarks of their respective owners and are mentioned for reference purposes only. Copyright © 2019, ASSA ABLOY Residential Group. All rights reserved.
Industry Canada:
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations.
Warning: Changes or modifications to this device, not expressly approved by ASSA ABLOY Residential
Group could void the user's authority to operate the equipment.
Ÿ
Consult the dealer or an experienced radio/TV technician for help.
Cet appareillage numérique de la classe A répond à toutes les exigences de l'interférence canadienne causant
des règlements d'équipement.
FCC:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful Interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Ÿ
Reorient or relocate the receiving antenna.
Class B Equipment
Ÿ
Increase the separation between the equipment and receiver.
Ÿ
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
