7
Anti-Tip Bracket Installation
To reduce the risk of tipping the appliance by
abnormal usage or improper loading, the
appliance must be secured by properly installing
the anti-tip device packed with the appliance.
1. Place the anti-tip bracket on the floor as
shown in the figure to the right.
2. Mark the locations of the 8 holes of the anti-tip
bracket on the floor.
3.
Use a 11/50” masonry drill bit and insert
plastic anchors.
4. Secure the anti-tip bracket to the floor, using
screws.
5. Slide appliance into position, and make sure
the leg engages the anti-tip bracket.
The measurements for the anti-tip bracket installation are illustrated below:
NOTE:
If the appliance is relocated, the bracket must be removed and installed in the new location.
Carbon Filter
A built-in carbon filter protects your wines by acting as a natural barrier against
harmful odors. The carbon filter should be replaced every 9-12 months
depending on the unit
’
s exposure level to odor. If the unit is placed in a kitchen,
regular replacement every three months is ideal.
Remove the carbon filter by turning counterclockwise to unlock from rear panel.
