manualshive.com logo in svg

Yale HSA6600, Installation Manual

Share
Download
Yale HSA6600 Installation Manual Download Page 1

Installation · Programming · Operating

Keep this manual safe for reference and future maintenance

Contents

Thank you for choosing the Yale HSA App Alarm kit. This 

simple to install system has been designed with the user in 

mind.

All the components are self contained and no wired 

connections are needed between the units. There is no 

need to damage the home decor, lift carpets or run cables.

You can install up to 20 accessories in this system. As well 

as extra Door/Window Contacts, PIR Motion Detectors and 

Smoke Detectors, you can add Key Fobs for added control 

convenience.

Regular testing and battery changes (when notified by the 

system) will ensure reliability and peace of mind.

There is no need to seek the services of a qualified 

electrician. The Hub is powered by an adaptor and all other 

components are powered by battery (all batteries included).

Some accessories are ‘tamper’ protected. Any 

unauthorised tampering with these items when the system 

is armed will result in the alarm being triggered.

The HSA App Alarm Kit does not support PIR Image / 

Video cameras, power switch or connection to Yale Smart 

Locks. This alarm system is NOT compatible with EF 

Series, AC Series & SR series accessories. Compatible 

with HSA accessories only.

1. Location planning  

2

2. Un-pack all the parts/Additional accessories  4
3. Initial set-up  

6

4. Mounting accessories  

8

5. Using the system  

10

6. About your Alarm System  

12

7. Using accessories  

13

8. Changing the batteries  

15

9. Troubleshooting  

17

10. Specifications  

 

19

Recommended Installation Sequence

We recommend you follow the simple install

sequence, headings numbered 1-5.

Information and illustrations are subject to change within this 

document. Yale reserves the right to alter the specification and 

product design at anytime without notice. Yale® is a registered 

trademark. © 2019 ASSA ABLOY. All rights reserved.

Issue No: 1B

For more information on this product and Yale Alarm 

Range visit 

www.yale.co.uk

Consumer Support: yale.co.uk/help

HSA App 

Alarm Kit

HSA6600 - HSA6610

Summary of Contents for HSA6600





















Reviews:

No comments

Brands by name

Popular brands

Load more brands