14
P/N YRD420-KD-F Rev A
1
5
6
4
3
Install Exterior Keypad
3
Install your lock with the door open.
Do not close your door until all the steps are completed.
1.
Refer to measurements
G
and
H
on the
Door Checker
(page 6) to measure
face bore hole. If the hole is
less than 2-1/8”
(
H
), remove adapter by
twisting it off the body of the lock.
Note: Removing the adapter might also help if your face bore and edge bore are of
irregular shape or are not properly aligned.
2.
Remove the plastic cover from the keypad.
3.
Make sure your deadbolt latch is in an unlocked position. Refer to
step 2, point 4
(page 13) for guidance on how to retract it, if needed.
4.
Slide the tailpiece through the deadbolt latch slot.
5.
Guide the wire cable under the deadbolt.
6.
Slide the keypad in place, making sure it’s on the exterior
part of your door.
Summary of Contents for Assure Lock 2 Touch
Page 2: ...P N YRD420 KD F Rev A...