NOTE
Make sure the back tamper switch of the Outdoor Contact is pressed against
the break-away area on the mounting bracket.
5) Secure the bottom fixing screw.
6) Replace the protective cover.
7) Mount the magnet bracket with two supplied screws to the door, attach
the magnet to the magnet bracket.
NOTE
The magnet and Outdoor Contact rib marks must align.
8) Installation is now complete.
Figure 4
Figure 5
Push
Breakaway Area
Knockouts
Figure 3
Changing the batteries (removing the protective cover)
1) Push the protective cover downwards with your hand.
2) Press from two sides of the lower part of the cover to detach the lower part of the protective
cover.
3) Press from two sides of the lower part of the cover to detach the upper part of the protective
cover, this will remove the protective cover.
4) Unscrew the screw from the battery cover.
5) Press the Tamper Switch twice to fully discharge before inserting new batteries.
6) Screw the battery cover back in place and replace the protective cover.
7) Press down the upper part of the protective cover until you hear a click sound.
8) Press down the lower part of the protective cover until you hear a click sound.