FEDERAL COMMUNICATIONS
C OMMISSION(F.C.C) STATEMENT
This equipment has been tested and found to comply with the limits of a Class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.
Reorient/Relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4.
Consult the dealer of an experienced radio/TV technician for help.
CAUTION:
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the
user's authority to operate the equipment.
NOTE:
The use of a non-shielded interface cable with this equipment
is prohibited.
IMPORTANT SAFEGUARDS
Warnings:
1. Read all of these instructions Save these instructions for later use, Please.
2. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
3. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards.
4. Do not use this monitor near water. For example near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, etc...
5. Do not place this monitor on an unstable cart, stand, or table. The monitor may fall, causing serious injury to a child or adult, and
serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer or sold with monitor. Wall or
shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of the
television receiver and to protect it from overheating, these openings must not be blocked or covered. The openings should
never be blocked by placing the monitor on a bed, sofa, rug, or other similar surface. This monitor should never be placed near
or over a radiator or heat register. This monitor should not be placed in built-in installation such as a bookcase unless proper
ventilation is provided.
7. This monitor should be operated only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied in your home, consult your monitor dealer or local power company.
8. This monitor is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin. This plug will only fit into
grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet. contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
9. Do not allow anything to rest on the power cord. Do not locate this monitor where the cord will be abused by persons working
on it.
10.Follow all warnings and instructions marked on the monitor.
11.For added protection for this monitor, when it is left unattended and unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the monitor due to power-line surges.
12.Do not overload wall outlets and extension cords as this can result into fire or electric shock.
13.Never push objects of any kind into this monitor through cabinet slots as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock. Never spill liquid of any kind on the monitor.
14.Do not attempt to service this monitor yourself since opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
15.Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the monitor.
c. If the monitor has been exposed to rain or water.
d. If the monitor does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions as improper adjustment of other controls, may result in damage and will often require extensive
work by a qualified technician to restore the monitor to normal operation.
e. If the monitor has been dropped or the cabinet has been damaged.
f. W hen the monitor exhibits a distinct change in performance this indicated a need for service.
16. W hen replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer
that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other
hazards.
17.Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to
determine that the monitor is in safe operating condition.
18.The socket outlet shall be near the equipment and shall be easily accessible.
19.The power supply cord is used as the main disconnect device.
E
n
g
li
s
h
