![background image](http://html2.mh-extra.com/html/yakima/slimshady/slimshady_installation-instructions-manual_3092812002.webp)
1
ASSEMBLE & INSTALL
Insert two bolts into the upper channel of each side of your
SlimShady, and put your clamps onto the bolts. Then place a lock
washer and nut on each bolt, and tighten loosely by hand.
Be sure the awning is oriented correctly with the
Yakima logo right side up in relation to the clamps.
2X
4X
4X
Measure the distance
between your crossbars.
Minimum crossbar spread is 24”.
Use the wrench to fully
tighten the 4 bolts.
X
X
=
=
Set the distance between
the clamps, space them
equidistant from the ends.
2
3
5.0 +.50/-.00 Nm