![background image](http://html1.mh-extra.com/html/yakima/prorack-k370/prorack-k370_fitting-instructions-manual_3393709004.webp)
Fitting Kit
EN
K370
●
Use hex screwdriver to reverse adjusting
screw 10 turns.
●
Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment.
●
Ensure each end of the crossbar is
adjusted equally.
●
Set bars to length (refer to the crossbar
instructions for crossbar adjustment).
●
Attaches onto raised roof rail. Flush Rail
●
Please check the rear of this manual for
information relating specifically to your
vehicle.
4