6100014323_9812172_Rev2
1/9
RuggedLine Flat 1200mm
2
1
12
13
IF NO TRACK PROVIDED THIS MOUNTING KIT REQUIRES AN 800 MM OR 1000 MM LONG UNIVERSAL TRACK TO BE
INSTALLED FIRST. NOTE: THE UPPER SURFACE OF THE TRACK NEEDS TO BE /- 2 DEGREES OF FLAT, LEFT TO RIGHT.
3
4
5
11
9
6
7
8
10
• 13 mm Spanner
TOOLS REQUIRED:
®
LockNLoad™ RuggedLine®
MAXIMUM PRODUCT LOAD RATING: 100 kg
IMPORTANT:
•
LOAD = WEIGHT OF PLATFORM or BARS + MOUNTING ACCES CARGO
•
PLEASE REFER TO VEHICLE MANUFACTURER SPECIFICATIONS FOR MAX ROOF
LOAD CAPACITY OF VEHICLE. THE LOWEST LOAD RATING APPLIES.
•
OFFROAD RATING: SCAN QR CODE FOR LOCKNLOAD LOAD RATING GUIDE.
REDUCTIONS MAY APPLY.
CARGO
•
Please read instructions carefully before installation.
•
Check the contents of kit. Each spine has the last four digits of the kit’s part number lasered in.
Contact your YAKIMA dealer if any parts appear missing, incorrect or damaged.
•
Clean your roof thoroughly prior to fitting the LockNLoad RuggedLine.
•
Place these instructions in the vehicle’s glove box after installation is complete.
FIRST TIME INSTALLATION
KIT CONTENTS
ITEM
COMPONENT
QTY ITEM
COMPONENT
QTY
1.
Track 1200 mm Spine LH 2172
x1
8.
M6 Nyloc Nut
x8
2.
Track 1200 mm Spine RH 2172
x1
9.
M6 Flat Wash
x8
3.
Pivot Bracket Assembly
x4
10.
LNL Flush Rail Bar Slot Bolt
x4
4.
M8 Socket Head Capscrew
x4
11.
LNL Flush Rail Bar Slot Plate
x4
5.
M8 Washer
x8
12.
Hex Key Ball End Allen Key 4 mm
x1
6.
M8 Nyloc Nut
x4
13.
Hex Key Ball End Allen Key 6 mm
x1
7.
M6 Self Aligning T-Bolt
x8
NOTE: ITEMS 3, 4, 5 & 6 ARE FOR USE ON A PLATFORM INSTALLATION.
ITEMS 10 & 11 ARE FOR AN LNL BAR INSTALLATION.
