6100008753_9831007_Rev6
4/6
BAR SLOT COVERS (OUTSIDE LEG)
Measure the Bar channel outside of
the Legs and subtract 20 mm from
this measurement.
Using the remaining pieces of
Slot Cover from Step 7, cut to this
length and insert into the underside
channel of each Bar end as shown.
8
-20 mm
SECURE END CAPS TO BARS
Insert the End Caps as shown.
A Rubber Mallet can be used to
assist installation.
9
Secure using Plastite Screw. Tighten
using a #2 Phillips Head Screwdriver.
CHECK BAR LEGS ARE SECURE
Check all Bars/Legs are secure.
10
FIT LEG COVERS
Using the Keys and Covers
supplied in the LockNLoad Leg
Kit, fit and lock all Leg Covers.
11
