![background image](http://html1.mh-extra.com/html/yakima/locknload-8005036/locknload-8005036_quick-start-manual_3355038002.webp)
80-13-036-Rev1
2/2
INSTALLATION
EYE BOLT ASSEMBLIES
Assemble 1 x Eye Bolt and 1 x Washer.
Insert into each corner bracket as shown.
1
POSITION CHANNEL NUTS IN SLATS
Locate Channel Nuts into cut outs on
Platform slats, keeping in mind the size
and position of the accessory to be
carried.
3
2
ASSEMBLE CHANNEL NUTS
Assemble 1 x Channel Nut onto
each Eye Bolt assembly as shown.
FIT TO ACCESSORY
Slide Bracket assemblies along
Platform channels to snugly fit
accessory to be carried.
4
x4
x4
If Bracket
assembly will
not slide in,
loosen nut to
increase gap.
For the next step,
ensure there is
a sufficient gap
between the Nut
and Bracket.
TIGHTEN EYE BOLTS
Tighten Eye Bolts. A tool such a
screwdriver through the eye of
the bolt may be used for leverage
to tighten Eye Bolts firmly.
5
SECURE LOAD
Secure accessory using non-elastic straps
tied over accessory, through Eye Bolts and
under Platform Slats.
6
x4
STRAPS SOLD
SEPARATELY.