6100001659-Rev1
7/9
ASSEMBLE LEGS
Assemble each Leg
as shown using 1 x
Leg Mounting Bracket
(from
Platform
Kit), 1 x
Nut Plate and the two
screw assemblies from
the previous step.
Tighten all M8 Hex
Bolts to 7Nm using
a 13mm Socket
Wrench or Spanner.
Leg Mounting
Bracket
Nut Plate
LEG LOCATION
Place Legs into intended position in vehicle gutter, locating the Rubber Foot Grip into the vehicle
gutter and the Mount Plate hooking under the gutter.
Take care not to damage vehicle.
We recommend spacing between 700mm - 1000mm apart.
7
≥ 700mm
INSTALL MOUNTING BLOCKS
Place a Mounting Block
(from
Platform
Kit)
on top of each
Leg assembly, lining up the
rivnut holes on Mounting
Block with holes on tabs of
Leg Mounting Bracket.
Secure with 2x M6 Capscrew
16mm with Washer as shown
(from
Platform
Kit).
Tighten all screws to 4Nm with
a 4mm Ball End Allen Key or a
suitable Torque Wrench.
NOTE -
The Mounting Block
assembly will still have
movement after securing
which is intended.
6
5
