IF YOU HAVE BARS THAT CAN BE MOVED…
Move the bars apart to a range of 30" to 50".
LOAD BASKET ONTO RACKS.
Center basket over your rack’s
crossbars.
ATTACH BRACKETS TO BASKET SECTIONS ONLY.
For first time bracket installation, refer to LoadWarrior instructions.
•IF YOU HAVE FIXED BARS:
•IF YOUR BARS MOVE:
(SIDE VIEW)
A friend
would make
this easier .
Q TOWER OWNERS:
NEVER REPOSITION THE Q TOWERS!
TIGHTEN YOUR CROSSBARS
IF YOU LOOSENED THEM.
IF YOU HAVE “Q TOWERS”
OR BARS THAT CANNOT MOVE…
Continue to STEP
.
T-BOLT IS LOCKED when the
“T” of the bolt is turned
inside the hole:
TIGHTEN
THE KNOBS.
SECURE THE BASKET TO
THE BARS.
Lock the T-Bolts.
ATTACH BOLTS AND KNOBS.
Insert bolts, engage the knobs.
Remove the machine screws from
the ends of the Extension tubes.
• Insert the LoadWarrior Extension.
You may find tapered screws
with your LoadWarrior.
Insert correct
screws into
each of the
joints and
tighten them.
IF YOU ALREADY HAVE A
LOADWARRIOR
INSTALLED:
• Remove it from your car.
• Disassemble the brackets
and set them aside.
• Separate the two basket
halves by removing the
screws at the joints.
NOTE: Always replace
machine screws (from Extension) into
same holes when reassembling.
MACHINE
SCREWS
TAPERED
SCREWS
DO NOT insert the tapered screws
from LoadWarrior into your
Extension’s holes.
