28-13-336-Rev1
7/8
CENTRE BRACKET ASSEMBLIES AND ADJUST TEE/SPRING NUTS
Follow Steps 1 - 4 for light bar installation, then position and centre Bracket assemblies on Platform
or Crossbar by referring to Step 8 for light bar installation. Ensure there is an equal distance from
the Platform corners or Crossbar ends as shown. Adjust Slot/Spring nuts in the channel so that
they align with the openings in Bracket Bases. The Torx Key can be used to assist Nut movement
within the channel.
A
SPOT LIGHT INSTALLATION
NOTE -
Example orientation shown is of Base down with Arms bottom mounted. This is suitable for mounting spot lights.
=
=
=
=
Secure Bracket assemblies to the Slot
Nuts within channel using 2 x M6 Button
Head Screws 16mm, 2 x M6 Spring
Washers and 2 x M6 Washers 18 X 1.6mm
as shown for each Bracket assembly.
Tighten all Screws to 7Nm with Torx Key
provided.
B1
SECURE BRACKET ASSEMBLIES TO BAR
Secure Bracket assemblies to the
Spring Nuts within channel using 2 x
M6 Button Head Screws 20mm, 2 x M6
Spring Washers and 2 x M6 Washers
18 X 1.6mm as shown for each Bracket
assembly.
Tighten all Screws to 7Nm with Torx Key
provided.
B2
SECURE BRACKET ASSEMBLIES TO
PLATFORM
