![background image](http://html.mh-extra.com/html/yakima/holdup-plus2/holdup-plus2_instructions-manual_893723005.webp)
4X
>
1034431D-5/21
If you have bike to bike interference
when loading two or more bikes,
adjust trays as necessary to eliminate
interference between bikes.
• Loosen the 4
tray bolts (do not
remove bolts).
• Slide the tray
left or right.
• Retighten the 4
tray bolts.
• Each tray can be
adjusted.
Rotate the pivot arm up until the
hook rests on the bike tire 1” or
less from the brakes or the fork.
sWING PIvOT ARM INTO PlAce.
secuRe The hOOK.
Compress the
hook against
the wheel by
applying firm
pressure.
• Refer to steps 11 through 17 to load additional bikes..
• Alternate bike direction with each additional bike
lOAd AddITIONAl BIKes.
Failure to place
wheel hook
in the correct
position can cause
your bicycle to
eject, and cause
personal injury,
property damage,
or death.
Feed the strap through the spokes of wheel.
Rotate the wheel
slightly, if necessary.
• Insert the
strap end
through
the top of
the ratchet
buckle.
• Be sure the
pad rests on
the rim.
secuRe ReAR Wheel sTRAP.
TIGhTeN ReAR Wheel sTRAP.
Move the ratchet tab up and
down to tighten the strap.