1033348-15/15
dIsAsseMblY
reMove all gear and accessories.
• Use 5/32” hex wrench to loosen coupler sleeve screws,
open couplers.
• Remove hoops. If coupler housings remain attached to
hoops, pull the housings off the hoop.
• Slide coupler housings up. Open coupler sleeves and
remove.
• Remove floor screws from foot disks.
• Remove wall screws from wall plates or Universal Mounting
Plate. (If using Universal Mounting Plate, remove screws
from back of plate and detach vertical assembly.)
• Detach top tube by pulling top sleeve from the vertical pole.
• Remove sleeve and unscrew wall plate from top tube.
• Detach foot assembly by pulling bottom sleeve from the
vertical pole. Remove sleeve.
• Unscrew foot disk from foot tube.
• Disassemble hoops: Depress pegs in connectors and pull
side tubes away from hoops.
CARe ANd
MAINTeNANCe
Wipe with a wet cloth or use a
solution of soap and water. do
not use abrasive cleaners
.
• Unit must be secured to walls at
four locations.
• If storing heavy items, feet must
be secured to the floor.
• Prior to each use check for any
loose parts, wear, or damage.
Discontinue use immediately
if the unit should become
damaged or malfunctions.
• Replace any cracked or bent
parts immediately.
This product is covered by
YAKIMA’s
“Love It Till You Leave It”
limited lifetime Warranty
To obtain a copy of this warranty, go online to www.yakima.com
or email us at [email protected]
or call (888) 925-4621
K E E P T H E S E I N S T R U C T I O N S !
dO NOT OveRlOAd ThIs PROduCT
Approximate base unit load Capacity:
800 lbs. evenly distributed over product
Approximate hoop load Capacity:
200 lbs. eACh hOOP
overloading this product could result in serious injury or damage to property.
TeChNICAl AssIsTANCe OR RePlACeMeNT PARTs
CONTACT YOuR deAleR OR CAll (888)925-4621
MONdAY ThROuGh fRIdAY, 7:00 AM TO 5:00 PM, PsT
37
