Instruction #1036043A - page 3 of 6
X Nm
4
REMOVAL
A. Remove the knobs, bolts, and SnapArounds™
that secure the handle. Remove the handle.
B. Remove the knobs that secure the wheels
and then remove the wheels.
Be sure to read all
the warnings and
warranty information
contained in the
insert accompanying
these instructions!
IMPORTANT!
INSTALL THE SNAPAROUNDS™, BOLTS, AND HANDLE.
Install the snaparounds on the
bar in the locations shown.
5
6
INSTALL THE KNOBS.
DETACH YOUR BASKET.
Install the knobs and fully tighten them.
Refer to your basket
instructions to remove
the EXO GearWarrior™
from your EXO System.
CAUTION!
Never operate the vehicle with
the EXO WarriorWheels™ installed on your
EXO System. You must remove the wheels
and handle before operating the vehicle!
NOTE:
The handle must be installed
on the same side as the front
wheels (the wheels that can swivel).
With the handle resting
on the ground, align the
handle and thread the bolts
through the snaparound
and handle as shown.
1.5 Nm
